Price list—J-Link related
Part # | Item | Description | Price [USD] |
---|---|---|---|
8.08.00 | Hi-Speed USB 2.0 driven debug probe Up to 1.0 MByte/sec download speed Package includes:
| 378.-- | |
8.19.00 | Hi-Speed USB 2.0 driven debug probe
Package includes:
Includes free software updates and 1 (one) year of email support | 378.-- | |
8.08.28 | Hi-Speed USB 2.0 driven debug probe Up to 1.0 MByte/sec download speed PLUS Software Package includes:
Included accessories:
| 598.-- | |
8.19.28 | Hi-Speed USB 2.0 driven debug probe
PLUS Software Package includes:
Included accessories:
Includes free software updates and 1 (one) year of email support | 598.-- | |
8.14.28 | Hi-Speed USB 2.0 driven debug probe
WiFi Software Package includes:
Included accessories:
Includes free software updates and 1 (one) year of email support | 998.-- | |
8.16.28 | Hi-Speed USB 2.0 driven debug probe Up to 3.0 MByte/sec download speed PLUS Software Package includes:
Included accessories:
| 748.-- | |
8.12.00 | Hi-Speed USB 2.0 and Ethernet driven debug probe Up to 3.0 MByte/sec download speed PRO Software Package includes:
Included accessories:
| 998.-- | |
8.08.90 | J-Link for educational use. Package includes:
For hobbyists and educational use only | 60.-- | |
8.08.91 | Debug probe in reduced form factor for educational purposes Package includes:
| 18.-- | |
8.08.93 | J-Link EDU Mini classroom package | Debug probe in reduced form factor for educational purposes Package includes:
| 198.-- |
8.18.00 | SuperSpeed USB 3.0 driven debug probe supporting unlimited streaming trace for Cortex-M devices, 64 MB on-board trace buffer Up to 3.0 MByte/sec download speed PRO Software Package includes:
Included accessories:
| 1,748.-- | |
8.20.00 | SuperSpeed USB 3.0 driven debug probe supporting unlimited streaming trace for Cortex-M, Cortex-R and Cortex-A devices, 64 MB on-board trace buffer Up to 3.0 MByte/sec download speed PRO Software Package includes:
| 2,498.-- |
Adapters
Part # | Item | Description | Price [USD] |
---|---|---|---|
8.06.00 | Adapts from .1" 20-pin Standard connector to .05" 19-pin Cortex-M connector. Package includes:
| 30.-- | |
8.06.01 | Adapts from .1" 20-pin Standard connector to 14-pin RX600 JTAG connector. Package includes:
| 30.-- | |
8.06.02 | Adapts from 20-pin, 0.1'' Standard connector to .05" 9-pin Cortex-M connector. Package includes:
| 30.-- | |
8.06.03 | Adapts from 20-pin, 0.1'' Standard connector to TI 14-pin connector. Package includes:
| 60.-- | |
8.06.04 | Adapts from .1" 20-pin Standard connector to .05" 10-pin needle pattern. Package includes:
| 98.-- | |
8.06.05 | Adapts from 10-pin, 0.1 inch connector to 10-pin, 0.05 inch needle pattern | 68.-- | |
8.06.06 | Adapts from the standard J-Link .1" 20-pin target connector to TI CTI-20 connector. | 60.-- | |
8.06.07 | Adapts from 20-pin, 0.1 inch Standard connector to 14-pin, PPC connector Package includes:
| 60.-- | |
8.06.08 | Adapts from 38-pin Mictor connector to standard 20-pin J-Link connector. | 125.-- | |
8.06.09 | Adapts from the standard J-Link .1" 20-pin target connector to Microchip RJ11 modular debug connector. Package includes:
| 30.-- | |
8.06.10 | Adapts from .01" 20-pin standard J-Link connector to .1" 14-pin RX FINE connector. Package includes:
| 30.-- | |
8.06.11 | Adapts from .1" 20-pin standard J-Link connector to 2mm 20-pin connector. | 60.-- | |
8.06.12 | The J-Link Signal Smoothing Adapter can be inserted between the J-Link debug probe and the debug target to overcome signal integrity issues. | 60.-- | |
8.06.13 | Adapter for non-standard J-Link <-> Target connection Package includes:
| 125.-- | |
8.06.14 | The J-Link Supply Adapter provides a fixed I/O voltage level for VTRef. It eliminates the need to connect VT Ref. It eliminates the need to connect to the target. | 60.-- | |
8.06.15 | The Intel FPGA Adapter (formerly J-Link Altera Adapter) connects to the 10-pin 100-mil Intel FPGA JTAG connector providing debug access to FPGA based MCU cores like the dual-core ARM Cortex-A9 in the Cyclone V devices. Package includes:
| 60.-- | |
8.06.16 | Adapts from .1" 20-pin J-Link connector to .05" 6-pin needle pattern. Package includes:
| 98.-- | |
8.06.17 | Adapts from .1" 20-pin J-Link connector to .1" 10-pin SiLabs C2 connector. Package includes:
| 60.-- | |
8.06.18 | The J-Link Target Supply Adapter provides a default voltage of 3.3 V to power the target using pin 19. The voltage can be adjusted by replacing resistors. | 60.-- | |
8.06.19 | Adapts from the standard J-Link .1" 20-pin target connector to Xilinx 2mm 14-pin connector (comp. Platform Cable USB II). Package includes:
| 60.-- | |
8.06.20 | Adapts from the standard J-Link 20-pin 0.1" target connector to Renesas 14-pin E1 connector | 60.-- | |
8.06.21 | Adapts from 20-pin .05" Cortex trace connector to 38 pin Mictor connector. The pin out follows the single target connector pinout specification as defined in the ARM "ETM Architecture Specification". | 125.-- | |
8.06.22 | The SEGGER STM8 adapter is required to connect the Flasher ATE, Flasher PRO and Flasher Portable PLUS with STM8 target boards. The adapter enables connections via SWIM connector, and the 10-pin 0.1"-pitch connector. | 30.-- | |
8.06.23 | Adapts from J-Link .1" 20-pin connector to Microchip .1" 6-pin connector. Package includes:
| 60.- | |
8.06.24 | The SEGGER SiFive-ARTY Adapter allows debug connections between J-Link and the ARTY board running SiFive RISC-V core bitstreams. The ARTY board provides several identical headers where the JD header is used as the debug connector, when running SiFive RISC-V bitstreams on the ARTY board. | 30.-- | |
8.06.25 | Adapts from the standard 20 pin 0.1" J-Link connector to the 6-pin 0.1" AVR SPI connector, 6-pin 0.05'' AVR SPI connector or 10-pin 0.1'' AVR SPI connector. Additionally a 5V or 3.3V power supply for the target is integrated. | 60.-- | |
8.06.26 | Adapts from the standard 20 pin 0.1" J-Link connector to the 6-pin 0.1" AVR PDI connector, 6-pin 0.05'' AVR PDI connector or 10-pin 0.1'' AVR PDI connector. Additionally a 5V or 3.3V power supply for the target is integrated. | 60.-- | |
8.06.27 | Adapts from the standard 20 pin 0.1" J-Link connector to a 10-pin row, allowing to connect J-Link to target PCBs via flying wires. Especially useful when hooking up prototype HW where no final connector is decided yet. Or for manually connecting a J-Link to ST Discovery boards. Package includes:
| 60.-- | |
8.06.28 | Adapts from the standard 20 pin 0.1" J-Link connector to the standard 10-pin 0.05" Cortex-M connector that is also used on many non-Cortex-M designs but with non-standard pinout. This adapter allows custom connections/wiring between the 20-pin and 10-pin side. Package includes:
| 30.- | |
8.06.30 | The SEGGER Programming Voltage Adapter delivers two externally provided voltages to the target for programming targets with voltage requirements beyond 5 V. It can directly be inserted between the Flasher and the debug cable maintaining a 1:1 connection of all debug signals. | 60.-- | |
8.08.01 | Adapter for ARM targets with .1" 14-pin mating JTAG connector Package includes:
| 60.-- |
Isolators
Part # | Item | Description | Price [USD] |
---|---|---|---|
8.07.00 | Standard .1" 20-pin male connector to provide electrical isolation. | 248.-- | |
8.07.01 | Standard .1" 20-pin male connector to provide electrical isolation. | 248.-- | |
8.07.02 | J-Link USB connector to provide host side electrical isolation. | 198.-- | |
8.07.10 | Standard .05" 19-pin Cortex-M connector to provide electrical isolation. | 378.-- |
Additional Software
Part # | Item | Description | Price [USD] |
---|---|---|---|
8.08.06 | Developer Pack DLL for J-Link. Includes 6 months of free support and updates. Company Wide License. | 998.-- | |
8.08.13 | J-Link PLUS Software bundle includes:
Includes 6 months of free support and updates | 378.-- | |
8.08.18 | J-Link SDK one year Support and Update Agreement extension. Can only be purchased by customers with a J-Link SDK License (Model 8.08.06). | 498.-- |
All prices exclude German sales tax. For shipments within Germany, please add sales tax. All prices are subject to change at any time and do not include shipment costs.
For price enquiries please contact sales@segger.com