J-Link Microchip Adapter
The J-Link Microchip Adapter allows debug connections between J-Link and target hardware which comes with Microchip PIC32 series MCUs. It supports the RJ12 modular debug connector as specified by Microchip as well as the 14-pin dual row MIPS debug header and the Microchip 6-pin single row PICkit connector (options, can be soldered by customer on demand). Note that the delivered modular cable will invert the pin order as shown in the pinout below.
| Pin | Signal |
|---|---|
| 1 | #MCLR |
| 2 | VDD |
| 3 | GND |
| 4 | DIO/PGD/RB7 |
| 5 | CLK/PGC/RB6 |
| 6 | NC |