Skip navigation

Atollic TrueSTUDIO for ARM

In order to use J-Link with Atollic TrueSTUDIO, it is usually not necessary to separately install the J-Link software and documentation package since TrueSTUDIO already comes with a J-Link GDB Server that is automatically started when starting the debug session. In the following, a short explanation on how to create a simple project for an eval board with TrueSTUDIO is given:

Used components
IDETrueSTUDIO for ARM V2.3.0
Emulator J-Link
J-Link SW VersionV4.40c
EvalboardSTM32F103ZE-EVAL (STM32F103ZE)
  • Start TrueSTUDIO and click File | New | C Project ... from the main menu
  • Enter a project name
  • Select Embedded C Project
  • Click Next
  • Select the eval board the project shall be created for and what configuration (debugging in Flash or RAM) is desired
  • Click Next
  • Select J-Link from the list of supported emulators
  • Click Next
  • Select which configurations shall be created (Debug configuration / Release configuration)
  • Click Finish to create the project
  • Click the Build button from the toolbar
  • In order to start a debug session, click Debug. A debug configuration with default settings, based on the information given when creating the project, will be automatically created by TrueSTUDIO (if it is necessary to configure custom settings click Run | Debug Configurations... from the main menu).

Now You are Ready to Go

You can start debugging and use J-Link with Atollic TrueSTUDIO for ARM.