Microchip LVP Adapter

Seamless connectivity for Flasher

Connects Flasher and J-Link to Microchip PIC32 MCUs.
Enables seamless Low-Voltage Programming for PIC32 hardware.
Delivers reliable debugging without replacing existing tools.

Buy now Compare Flasher adapters Documentation

1.Overview
2.Pinout & schematics
3.Suitable products
1. 3.1.Flasher
2. 3.2.J-Link

Overview

J-Link Microchip Adapter

The Microchip LVP Adapter allows debug connections between J-Link or Flasher and target hardware, which comes with Microchip PIC32 series MCUs. It supports the RJ12 modular debug connector as specified by Microchip as well as the 14-pin dual row MIPS debug header and the Microchip 6-pin single row PICkit connector (options, can be soldered by customer on demand). Note that the delivered modular cable will invert the pin order as shown in the pinout below. Please note that the adapter supports LVP mode only.

Pinout & schematics

Microchip-Adapter-Schematic

RJ12

Pin: Signal
1: #MCLR
2: VDD
3: GND
4: DIO/PGD/RB7
5: CLK/PGC/RB6
6: NC

Suitable products

Flasher

A handheld device labeled "Flasher" from SEGGER, primarily gray with blue rubber edges. It features three status indicators: "Ready" (OK), "Not ready," and "Fail," along with a "PROG" button. This device is used for programming and debugging electronics.

J-Link

Get in touch with us

Have questions or need assistance? Our Embedded Experts are here to help!

Reach out to us for:

Licensing quotes
Technical inquiries
Project support