SEGGER J-Link adds full support for Renesas’ FINE Interface
J-Link is the only silicon vendor independent debug probe in the market capable of connecting to a device with the FINE-interface.
“Support for Renesas’ FINE-interface makes J-Link even more versatile. It puts the full J-Link family yet another step ahead of the competition”, says Ivo Geilenbruegge, Managing Director of SEGGER.
“We are making sure our complete line of J-Link debug probes support all major tool vendors, CPU architectures and target interfaces. Being the first vendor supporting Renesas’ single-wire debug interface is just one more point of proof”, says Alexander Gruener, Product Manager for J-Link.
“SEGGER’s development team continues to impress us with the short development time needed when adapting to new targets. Their support for the FINE-interface significantly improves the eco-system for our RX-series. The SEGGER JLINK FINE-interface is now accessible for all popular RX tool-chains on the market, including the free of charge e2studio eclipse based development environment”, says David Noverraz, MCU Applications and Tools manager for Renesas Europe.
The SEGGER J-Link is the most popular debug probe on the market. It is tool chain independent and works with free GDB-based tool chains such as emIDE and Eclipse, as well as commercial IDEs from: Microchip (MPLAB® X), Atmel, Atollic, Coocox, Cosmic, Freescale, IAR, KEIL, Mentor Graphics, Python, Rowley, Renesas, Tasking and others. With the J-Link family, investments in the debug probe are preserved when changing compiler or even CPU architecture.
J-Link supports multiple CPU families, such as ARM 7, 9, 11, Cortex-M0, M0+, M1, M3, M4, R4, A5, A8, A9 as well as Renesas RX100, RX200, RX610, 620, 62N, 62T, 630, 631, 63N and Microchip PIC32; there is no need to buy a new J-Link or new license when switching to a different yet supported CPU family or tool-chain. SEGGER is also continuously adding support for additional cores, which in most cases, only requires a software/firmware update. Unlimited free updates are included with even the baseline model of the J-Link family. SEGGER is excited to continue advanced development of its cutting edge embedded tool solutions to be utilized with pretty much any development environment you choose. All J-Links are fully compatible to each other, so an upgrade from a lower-end model to a higher-end model is a matter of a simple plug-and-play.
Full product specifications are available at: www.segger.com/jlink.html The J-Link-Software is available at: www.segger.com/download_jlink.html U.S. On-Line Web Shop: http://shop-us.segger.com Online Shop (Europe, Asia, Africa): http://shop.segger.com