Skip navigation

SEGGER News

SEGGER News - Wifi Quick Start

SEGGER introduces WiFi Quick Start

SEGGER introduces WiFi modules (2.4GHz and 5GHz supported) for its emPower Cortex-M Evaluation Platform. Getting a project with WiFi off the ground has never been easier!
Evaluation software is included enabling a Web Server via WiFi in mere minutes.

The available modules in combination with the emPower platform permit comparison of different WiFi modules, as well as evaluation of the SEGGER embOS/IP stack.

The evaluation software consists of a Web Server running on the processor of the emPower board, accessible via any computer on the local network.

The software is available in binary form (executable), and as a project for SEGGER’s Embedded Studio, with source code of the application program.

SEGGER’s embOS/IP stack with WiFi support handles all communication in the exact same way as in a system with wired Ethernet, allowing the software engineer to port an existing application from wire-bound Ethernet to WiFi easily and without any loss of functionality. The same server, client, and application software can be used while exposing the same socket interface.

All News

2019
Nov.07
SEGGER_Blog_Preview_Image.jpg

I used to think that floating-point was not for Embedded Systems. Too slow, too much code overhead and rounding is always a problem. It turns out that...

[Read more...]