[J-Link] New Product J-Link-TI-20-CTI Adapter available
New Product J-Link-TI-20-CTI Adapter available. J-Link-TI-20-CTI Adapter adapts from the standard J-Link 20-pin 0.1" target connector to TI CTI-20 connector. This adapter allows to connect J-Link to eval boards with TI MCUs that are equipped with a TI CTI-20 connector (as the AM335x evaluation module). The adapter is compatible to all available J-Link models. Read more...

[J-Link] New J-Link Release 4.42 adding support for multiple devices from Analog, Atmel (SAM3S/SAM4), AyDeeKay, EnergyMicro (Leopard Gecko, Giant Gecko), NXP and ST (STM32F0/STM32L)
New devices:

• Analog Devices ADuC7121, ADuC7122, ADuC7124, ADuC7126
• Atmel AT91SAM3S8B, AT91SAM3S8C, AT91SAM3SD8B, AT91SAM3SD8C, AT91SAM4S4A, AT91SAM4S4B, AT91SAM4S4C, AT91SAM4S8A, AT91SAM4S8B, AT91SAM4S8C, AT91SAM4S16A, AT91SAM4S16B, AT91SAM4S16C
• AyDeeKay KamCho, uSobek
• Energy Micro EFM32GG230F512, EFM32GG230F1024, EFM32GG232F512, EFM32GG232F1024, EFM32GG280F512, EFM32GG280F1024, EFM32GG290F512, EFM32GG290F1024, EFM32GG295F512, EFM32GG295F1024, EFM32GG330F512, EFM32GG330F1024, EFM32GG332F512, EFM32GG332F1024, EFM32GG380F512, EFM32GG380F1024, EFM32GG390F512, EFM32GG390F1024, EFM32GG395F512, EFM32GG395F1024, EFM32GG840F512, EFM32GG840F1024, EFM32GG842F512, EFM32GG842F1024, EFM32GG880F512, EFM32GG880F1024, EFM32GG890F512, EFM32GG890F1024, EFM32GG895F512, EFM32GG895F1024, EFM32GG940F512, EFM32GG940F1024, EFM32GG942F512, EFM32GG942F1024, EFM32GG980F512, EFM32GG980F1024, EFM32GG990F512, EFM32GG990F1024, EFM32GG995F512, EFM32GG995F1024, EFM32LG230F256, EFM32LG232F256, EFM32LG280F256, EFM32LG290F256, EFM32LG295F64, EFM32LG295F128, EFM32LG295F256, EFM32LG330F64, EFM32LG330F128, EFM32LG330F256, EFM32LG332F64, EFM32LG332F128, EFM32LG332F256, EFM32LG380F64, EFM32LG380F128, EFM32LG380F256, EFM32LG390F64, EFM32LG390F128, EFM32LG390F256, EFM32LG395F64, EFM32LG395F128, EFM32LG395F256, EFM32LG840F256, EFM32LG842F256, EFM32LG880F256, EFM32LG890F256, EFM32LG895F64, EFM32LG895F128, EFM32LG895F256, EFM32LG940F64, EFM32LG940F128, EFM32LG940F256, EFM32LG942F64, EFM32LG942F128, EFM32LG942F256, EFM32LG980F64, EFM32LG980F128, EFM32LG980F256, EFM32LG990F64, EFM32LG990F128, EFM32LG990F256, EFM32LG995F64, EFM32LG995F128, EFM32LG995F256
• NXP LPC1224/101, LPC1224/121, LPC1225/301, LPC1225/321, LPC1226/301
• ST STM32F051C6, STM32F051C8, STM32F051K6, STM32F051K8, STM32F051R6, STM32F051R8, STM32L151QC, STM32L151QD, STM32L151RC, STM32L151RD, STM32L151VC, STM32L151VD, STM32L151ZC, STM32L151ZD, STM32L152QC, STM32L152QD, STM32L152RC, STM32L152RD, STM32L152VC, STM32L152VD, STM32L152ZC, STM32L152ZD

[J-Link] New J-Link Release 4.42: GDB-Server supports Renesas RX600 devices

[emWin] New Features in version 5.14: spinbox widget, image widget for animated images, motion/gesture support
Demonstration for motion/gesture support can be found in the samples: Radial Menu. http://www.segger.com/cms/emwin-samples.html

[emUSB Device] New target drivers for Freescale Kinetis K70, ST STM32F4xx and Toshiba TMPM369
We have added new target device drivers for emUSB-Device for Freescale Kinetis K70, ST STM32F4xx and Toshiba TMPM369. For a complete list of available emUSB-Device drivers please consult: http://www.segger.com/emusb-drivers.html

[embOS] Additional information: CPU/evalboard support table now on each port-related website
embOS offers many ready to go start projects and support packages. These are now listed in a table on every embOS port website. The port list can be found at: http://www.segger.com/cms/embos-ports.html

[J-Link] J-Link fully supports new Infineon XMC4500-series. Starter-kit will be delivered with J-Link Lite. [v4.40c]
The J-Link will support the new Infineon Cortex-M4 based XMC4500-series right from its introduction. The Infineon starter-kit will include a J-Link Lite.

[embOS] embOS for ARM IAR V6 now supports Cortex A8, BSP available for TI OMAP3517
embOS for ARM IAR V6 now supports Cortex A8 The new version 3.84c of embOS for ARM and IAR supports Cortex A8 and comes with a start project for TI OMAP3517.

[J-Link] New Product J-Link Needle Adapter to program in circuit without extra connector
The J-Link Needle Adapter is compatible with our J-Link and Flasher products. The 20/10 version is needed for J-Link and Flasher ARM, Flasher RX and Flasher PPC. The 10/10 version is used for Flasher 5, Flasher ST7 and Flasher STM8. For more information on the needle adapter please look at http://www.segger.com/jlink-needle-adapter.html.

[embOS] Support for Renesas V850E2-MN4 added
V850E2_MN4 supported. New embOS sources V3.84a

[embOS] embOS for NIOS now supports the vectored interrupt controller
The new version 3.84 of embOS for NIOS2 and NIOS software build tools can be used for NIOS2 CPUs with VIC.

[J-Link] Flash programming support for Samsung S3FN41F devices added.
DLL/J-Flash: Flash programming support for Samsung S3FN41F devices added. J-Flash: Support for chip erase command for Samsung S3FN21x and S3FN41F devices added.

[emFile] New emFile version available (v3.26b).
This update includes the new universal NAND driver and a new NOR driver with reduced RAM usage.

[embOS] New embOS release of embOS Cortex M IAR with Cortex M4F support.
Segger embOS Cortex M IAR V3.84.1 supports Cortex M4F with floating point unit and includes new start projects for STM32F40G-Eval, STM32F4-Discovery and many other evalboards. For additional information please follow the link to the port page.

[embOS] embOS CM3 Atollic V3.84 is compatible with Atollic TrueStudio for ARM 2.2.0
SEGGER embOS for Cortex M3 and Atollic is fully tested with Atollic TrueStudio for ARM 2.2.0

[embOS] New embOS Cortex M IAR V3.84 Release including Cortex-M4F FPU support and new BSPs
embOS supports Cortex M4F with Floating Point Unit now. Additionally BSPs have been added for the following eval-boards: Energy Micro EFM32-GG990-DK Emdedded Artists NXP LPC1788 Future Designs NXP LPC1788 uEZGUI IAR NXP LPC1788-SK IAR ST STM32F207_IAR_SK ST STM32F457IG-Eval ST STM32F457IG-Discovery

[J-Link] IDE integration with Atollic has been tested
For a detailed instruction how to set up Atollic for use with J-Link, please look at: http://www.segger.com/IDE_Integration_Atollic.html

[emUSB Host] Complete eval-package for Renesas RX62N RDK includes emUSB-Host now
SEGGER Eval Software for Renesas RX62N RDK includes emUSB-Host now. Please see Evaluation Board description

[J-Link] Flash programming support for STM32F4xxx series added.
J-Link DLL and J-Flash now support the Cortex-M4 from STMicroelectronics STM32F4xxx series

[embOS] embOS AVR IAR now supports the ATXMega
Please refer to the embOS Port Page for ATMega CPUs.

[emFile] New universal NAND flash driver allows multi-bit error correction
The universal NAND driver supports NAND flash memories with page sizes greater than 2048 bytes. For added flexibility error correction can be performed within the application or the hardware.

[J-Link] J-Flash multi-bank support added (v4.35g)
Multi-Bank support allows programming of different flash memories in one step. Therefore only one project is needed to program the MCU's flash and external memory like a NOR flash memory.

[J-Link] Coming soon: J-Link support for TI OMAP4430 (J-Link software v4.35g)
The TI OMAP4430 needs its own script-file for JTAG-ICEPick setup and core-selection. The script-file will be included with J-Link Software version v4.35g

[General] Full evaluation version available for LPC 1788
Evaluation version includes embOS, embOS/IP with Webserver and FTP Server and SMTP Client, emWin, emFile with RAMDisk and MMC/SD, emUSB-Device with Bulk, HID, MSD, CDC and emUSB-Host. See Evaluation Board description

[J-Link] Flash programming support for Fujitsu devices added
- DLL/J-Flash: Flash programming support for Fujitsu MB9AF111, MB9AF112, MB9AF114, MB9AF115, MB9AF116 added
- DLL/J-Flash: Flash programming support for Fujitsu MB9AF311, MB9AF312, MB9AF314, MB9AF315, MB9AF316 added

[J-Link] J-Link GDB-server now free
For more information see the press release for the GDB-server under News

[embOS] New embOS board support packages for Renesas RX210, RX63N and RX630-based eval-boards
We have added board support packages for RPBRX210, RSKRX210, RSKRX630 and YRDKRX63N to our embOS RX ports. For further information see the product pages:
embOS RX HEW
embOS RX HEW-GNU (KPIT)
embOS RX IAR

[J-Link] J-Link Software supports flash-programming for ON Semi devices and Toshiba TMPM366 devices (beta-version 4.35c)
- DLL/J-Flash: Flash programming support for ON Semi Q32M210 devices added
- DLL/J-Flash: Flash programming support for Toshiba TMPM366FDXBG TMPM366FWXBG, TMPM366FYXBG

[J-Link] Flash programming support for TI TMS570-devices added (software version v4.34c)
DLL/J-Flash: Flash programming support added for TMS570LS101xx series, TMS570LS102xx series, TMS570LS202xx series, TMS570LS212x series, TMS570LS213x series and TMS570LS313x series

[emUSB Host] emUSB-Host supports FTDI FT232-series serial to USB-converters

[General] Coming up soon: Full middleware support for Renesas V850E2M/MN4 core
The middleware support includes embOS, emFile, embOS/IP, emUSB-Device, emUSB-Host and emWin.

[J-Link] J-Link support for TI RM48x and TMS570LS31x/21x is ready
TI RM48L5x, TI RM48L7x, TI RM48L9x and TMS570LS31x/21x are supported by J-Link including flash programming and flash breakpoints.

[emWin] GUIBuilder for emWin is available
For more information see the press release for the GUIBuilder under News

[J-Link] Improved support for ARM11 speeds up communication and download
Added full intelligence for ARM11 cores to the firmware.

[emLoad] emLoad enables firmware updates via USB memory stick
Using emUSB-Host and the MSD class, emLoad can now be used to update the firmware simply by plugging a USB-stick into the device and resetting it.