|
We have board support packages (BSPs) and complete projects
available for various Freescale Eval boards.
Different software packages are available for different
boards; the packages include some or all of the following components:
- embOS - real time OS / RTOS
- emWin - graphic software / GUI
- emFile - file system with support for NAND-, NOR- flashes, SD, CF cards, IDE and more
- emUSB - USB device stack with support for bulk, MSD, CDC, HID and more
Some packages are executable demos, which can not be modified; some packages
are trial versions, which come with the software in a library and the
application in source code form, as well as a project for the IDE that
has been used. Trial versions can usually be recompiled easily in less
than a minute if the required compiler and IDE is installed. The application
program can be modified, allowing intensive tests of the software. emWin
trial versions usually also contain a simulation environment which allows
test and recompilation on a PC.
Below is a list of supported Eval boards. The software
can easily be ported to other hardware platforms. If you are looking for
software for an Eval board not in this list, please get in touch with
us.
Supported Eval boards
Axiom M52233DEMO Eval board
|
Controller:
- PCF52233CAF60 (Freescale)
CPU:
Board main Features:
- Ethernet port
- RJ-45 ethernet connector
- Integrated USB BDM port
- BDM / JTAG port (not installed)
- ON/OFF power switch LED indicator
- RESET switch indicator
- 4 user LEDs
- 2 user push switches
- Type B USB connector
- DB9 serial connector
More |
Axiom M52223EVB Eval board
|
Controller:
- PCF52223CAF80 (Freescale)
CPU:
Board main Features:
- MCF52223 CPU
- BDM / JTAG Port
- USB On-The-Go Bus w/ Mini AB connector
- Optional high current output on USB bus
- 3ea. RS-232 Serial Port w/ DB9-S Connector
- ON/OFF Power Switch w/ LED indicator
- RESET switch w/ indicator
- On-board Voltage Regulator, +3.3V, +5.0V
- 4 user LED’s w/ enable
- 2 user push switches
- Light Sensor
- USB Mini AB Connector
- 3ea. DB9 Serial Connectors
More |
LogicPD M5329 Eval board
|
Controller:
- PCF5329CVM240 (Freescale)
CPU:
Board main Features:
- MCF5329 Fire Engine
- LCD Display Connector (Integrated LCD, touch, and backlight
connector for Zoom Display Kits)
- Stereo input and output jacks
- CompactFlash Type 1 card (memory-mode only)
- Ethernet connector
- One CAN 2.0B port
- One USB 2.0 full/low-speed host and one full/low-speed device
More |
LogicPD M5329 Eval board + LogicPD LCD-6.4-VGA-10 Display
|
Controller:
- PCF5329CVM240 (Freescale)
CPU:
Board main Features:
- MCF5329 Fire Engine
- LCD Display Connector (Integrated LCD, touch, and backlight
connector for Zoom Display Kits)
- Stereo input and output jacks
- CompactFlash Type 1 card (memory-mode only)
- Ethernet connector
- One CAN 2.0B port
- One USB 2.0 full/low-speed host and one full/low-speed device
More |
Copyright SEGGER Microcontroller GmbH & Co.KG. All
rights reserved.
For more information, please visit our web site
www.segger.com or contact us at info@segger.com
Last update:
April 15, 2008
|
Software
for Freescale Eval boards
