There are several J-Link models on the market which are not sold directly to end customers by SEGGER. These models are slighty different from the regular SEGGER J-Links regarding what features are supported etc. In general, however, they are all J-Link compatible and use the same software package as the regular J-Link models.
J-Link models that are part of the "other J-Links" category, are:
J-Link LITE ARM
|Fully functional version of J-Link with standard 20-pin 0.1'' JTAG/SWD connector, which is designed to be bundled with eval boards only. More...|
J-Link LITE CortexM
|Specific OEM-version of SEGGER J-Link LITE with 19-pin or 9-pin 0.05'' Samtec FTSH connector which is designed to be used with Cortex-M devices only. More...|
J-Link LITE RX
|Specific OEM-version of SEGGER J-Link LITE which is designed to be used with Renesas RX600 series MCUs only. More...|
|J-Link as single chip microcontroller version which is designed to be an "on-board" emulator on an eval board. More...|
J-Link OEM versions
The OEM versions look different, but use basically identical hardware.
Some of these OEM versions are limited in speed, some of these can only be used with certain chips and some have certain add-on features enabled, which normally requires license. More...