SEGGER - Jobs
emWin upgrade     Trade-In program     Web shop

J-Link LITE CortexM-5V

Debug probe for Cortex-M cores

J-Link Lite CortexM-5V is a specific version of the SEGGER J-Link LITE debug probe which is designed to be used with Cortex-M devices. If you are selling evaluation-boards, J-Link Lite CortexM-5V is an inexpensive debug probe solution for you. Your customers receives a widely acknowledged debug probe for Cortex-M devices which allows them to start right away with their development. 

Features

  • Very small form factor
  • Fully software compatible to J-Link BASE
  • Cortex-M0/M0+/M1/M3/M4/M7 cores supported
  • Supported target interfaces: SWD (incl. SWO)
  • Debug interface speed up to 2 MHz
  • Flash download into supported MCUs
  • Standard .05" 9-pin Samtec FTSH connector
  • 1.2V - 5V target interface voltage

Models

Please note that J-Link LITE CortexM-5V is available as .05" 9-pin Samtec FTSH connector version only.

Package content

J-Link LITE CortexM-5V is delivered with the following components:
  • J-Link LITE CortexM-5V with standard .05" 9-pin Samtec FTSH connector
  • .05" 10-pin ribbon cable
  • Mini-USB cable

Licensing

J-Link LITE CortexM-5V is only delivered and supported as part of a starter kit, which includes an evaluation board. It is not sold separately. It may only be used with the evaluation board it came with. Support is given via the eval board manufacturer and via SEGGER forum.


Specification

General
Supported OS Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows XP x64
Microsoft Windows 2003
Microsoft Windows 2003 x64
Microsoft Windows Vista
Microsoft Windows Vista x64
Microsoft Windows 7
Microsoft Windows 7 x64
Microsoft Windows 8
Microsoft Windows 8 x64
Microsoft Windows 10
Microsoft Windows 10 x64
Linux
Mac OSX 10.5 and higher
Electromagnetic compatibility (EMC) EN 55022, EN 55024
Operating temperature +5 °C ... +60 °C
Storage temperature -20 °C ... +65 °C
Relative humidity (non-condensing) Max. 90% rH
Size (without cables) 41mm x 34mm x 8mm
Weight (without cables) 6g
Mechanical
USB interface USB 2.0
Target interface .05" 9-pin Samtec FTSH connector
Target Interface, Electrical
Power supply USB powered
Max. 50mA + Target Supply current.
Target interface voltage (VIF) 1.2V ... 5V
Target supply voltage 4.5V ... 5V
Target supply current Max. 300mA
LOW level input voltage (VIL) Max. 40% of VIF
HIGH level input voltage (VIH) Min. 60% of VIF
Target Interface, Timing
Data input rise time (Trdi) Max. 20ns
Data input fall time (Tfdi) Max. 20ns
Data output rise time (Trdo) Max. 10ns
Data output fall time (Tfdo) Max. 10ns
Clock rise time (Trc) Max. 10ns
Clock fall time (Tfc) Max. 10ns


If you are interested in J-Link LITE CortexM-5V, please contact info@segger.com