Readme.txt for embOS for RX and IAR compiler

This project was built for IAR Workbench for RX V4.12A.

Supported hardware:
===================
The sample project Start_RSKRX71M was built to run
on the Renesas RSKRX71M start-kit, but may be used
on other target hardware as well.


Configurations / Sessions
=========================

- Debug:
  This configuration is built for a little endian target.
  It is prepared for debugging and downloading using J-Link.
  To use SEGGER SystemView with this configuration, configure
  SystemView for R5F571ML as target device and JTAG at 2000 kHz
  as target interface.

- Release:
  This configuration is built for a little endian target.
  It uses an embOS release library.
  It is prepared for downloading using J-Link.
