Readme.txt for embOS for RX and IAR compiler

This project was built for IAR Workbench for RX V4.20A.

Supported hardware:
===================
The sample project Start_RX66N was built to run
on the Renesas RSKRX66N RTK, but may be used
on other target hardware as well.


Configurations / Sessions
=========================

- Debug:
  This configuration is built for a little endian target.
  It is prepared for debugging and downloading using the Renesas E2 lite emulator.
  Please ensure FINE interface is selected in E2/E2 Lite Hardware Setup.

- Release:
  It uses an embOS release library.
  This configuration is built for a little endian target.
  It is prepared for debugging and downloading using the Renesas E2 lite emulator.
  Please ensure FINE interface is selected in E2/E2 Lite Hardware Setup.
