Readme.txt for embOS for RX and IAR compiler

This project was built for IAR Workbench for RX V4.10A.

Supported hardware:
===================
The sample project Start_RPBRX62N was built to run
on the Renesas RPBRX62N promotion board, but may be used
on other target hardware as well.

Configurations / Sessions
=========================

- Debug:
  This configuration is built for a little endian target.
  It is prepared for debugging and downloading using the J-Link RX on board emulator.
  To use SEGGER SystemView with this configuration, configure
  SystemViewer for RX62N as target device and JTAG at 2000 kHz
  as target interface.

- Release:
  This configuration is built for a little endian target.
  It uses an embOS release library.
  It is prepared for downloading using the J-Link RX on board emulator.
