Readme.txt for embOS for RX and IAR compiler

This project was built for IAR Workbench for RX V4.10A.

Supported hardware:
===================
The sample project Start_RSKRX1111 was built to run
on the Renesas RSKRX111 evalboard, but may be used
on other target hardware as well.

Configurations / Sessions
=========================

- Debug:
  This configuration is built for a little endian target.
  It is prepared for debugging and downloading using the J-Link RX emulator.
  To use SEGGER SystemView ( > V2.38 ) with this configuration,
  configure SystemViewer for RX111 as target device and FINE at
  2000 kHz as target interface.

- Release:
  This configuration is built for a little endian target.
  It uses an embOS release library.
  It is prepared for downloading using the J-Link RX emulator.
