ReadMe.txt for the YLCDRX63NE start project.

This project was built for e2studio version 2021-07 (21.7.0) and GNURX version 8.3.0.202104.

Supported hardware:
===================
The sample project for Renesas RX63N is prepared
to run on a Renesas YLCDRX63NE starter-kit, but may be used on other
target hardware as well.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library
  is used.
  To use SEGGER SystemView with this configuration, configure
  SystemView for R5F563NE as target device and JTAG at 12000 kHz
  as target interface.

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.
