ReadMe.txt for the RSKRX220 start project.

This project was built for e2studio version 2021-07 (21.7.0) and GNURX version 8.3.0.202104.

Supported hardware:
===================
The sample project for Renesas RX220 is prepared
to run on a Renesas RSKRX220 evalboard, but may be used
on other target hardware as well.

Configuration for e2Studio project:
===================================
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library
  is used.
  To use SEGGER SystemView with this configuration, configure
  SystemView for R5F52206 as target device and FINE at 2000 kHz
  as target interface.

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.
