ReadMe.txt for the LFCPNX-100 start project.

This project was built for the Lattice Propel IDE 2.2.

Supported hardware:
===================
The sample project for the Lattice LFCPNX-100 is prepared to
run on a Lattice CertusPRO-NX Versa board. Using different
target hardware may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  RAM. An embOS debug and profiling library is used.

- Release:
  This configuration is prepared for download into internal
  RAM. An embOS release library is used.
