ReadMe.txt for the FE310-G002 start project.

This project was built for SEGGER Embedded Studio for RISC-V V6.30.

Supported hardware:
===================
The sample project for the FE310-G002 is prepared to run on a SiFive
HiFive1 Rev B eval board. Using different target hardware may require
modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library
  is used.

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.
