Readme.txt for BSP for 78F1166

Supported hardware:
===================
The sample project for NEC K0R 78F1166 is prepared
to run on an NECs 78K0R Cool it! eval board,
but may be used on other target hardware as well.

Configurations
==============
- FF3_Debug:
  This configuration may be used to debug an application using
  CSpy and TK-78 USB debug interface.
  It uses an embOS debug library.

- FF3_Debug_SIM:
  This configuration may be used to debug an application using
  CSpy simulator.
  It uses an embOS debug library.

- FF3_S_Release:
  This configuration may be used to generate a release
  version which uses a stack check library.

- FF3_Release:
  This configuration may be used to generate a release
  version which uses a release library.

To use the TK-78 debug interface with the 78K0R Cool it!
eval board, set the DIP switch as follows:

For Debugging, downloading:
1: OFF
2: ON
3: ON
4: OFF
5: OFF
6: ON
7: ON
8: ON

For running the application, using embOSView:
1: OFF
2: OFF
3: OFF
4: ON
5: ON
6: ON
7: ON
8: ON
