ReadMe.txt for the STM32F107 start project.

This project was built for Rowley CrossWorks V4.7.1.

Supported hardware:
===================
The sample project for the ST STM32F107 is prepared to 
run on an STM3210C Eval board. Using different target 
hardware may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library
  is used.

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.


Notes:
======
To use ethernet functionality please make sure that you set
jumper  JP4 (MCO) to 1-2 (left side / away from the ethernet jack).
