ReadMe.txt for the STM32F072 start project.

This project was built for Rowley CrossWorks V4.7.1.

Supported hardware:
===================
The sample project for th STM32F072 is prepared to run on 
an STM32F072B Discovery board. Using different target 
hardware may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library
  is used.
  To use SEGGER SystemView with this configuration, configure
  SystemView for Cortex-M0 as target device and SWD at
  2000 kHz as target interface. In addition, the RTT buffer
  address must be specified with this target (in case of doubt,
  search for _SEGGER_RTT in the respective mapfile).

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.
