ReadMe.txt for the Renesas R7FA8D1 start project.

This project was built for Rowley CrossWorks V4.9.0.

Supported hardware:
===================
The sample project for the R7FA8D1 is prepared to run on an Renesas EK-RA8D1 board.
Using different target hardware may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal Flash using J-Link.
  An embOS debug and profiling library is used.
  To use SEGGER SystemView with this configuration, configure SystemViewer for
  R7FA8D1 as target device and SWD at 2000 kHz as target interface.

- Release:
  This configuration is prepared for download into internal Flash using J-Link.
  An embOS release library is used.
