ReadMe.txt for the NXP LPC55S69 start project.

This project was built for Rowley CrossWorks V4.7.1.

Supported hardware:
===================
The sample project for the NXP LPC55S69 is prepared to run on
an NXP LPCXpresso55S69 Eval board. Using different target
hardware may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library
  is used.
  To use SEGGER SystemView with this configuration, configure
  SystemViewer for LPC55S69 as target device and SWD at 2000 kHz
  as target interface.

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.
