ReadMe.txt for the NXP LPC1788 start project.

This project was built for Rowley CrossWorks V4.7.1.

Supported hardware:
===================
The sample project for the NXP LPC1788 is prepared to run
on an FDI uEZGUI-1788-70WVE eval board. Using different
target hardware may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library
  is used.

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.
