ReadMe.txt for the NXP LPC1768 start project.

This project was built for Rowley CrossWorks V4.7.1.

Supported hardware:
===================
The sample project for the NXP LPC1768 is prepared to
run on a KEIL MCB1700 eval board. Using different
target hardware may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library
  is used.
  An embOS debug and profiling library is used.
  To use SEGGER SystemView with this configuration, configure
  SystemViewer for LPC1768 as target device and SWD at 2000 kHz
  as target interface.

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.
