ReadMe.txt for the NXP K64FN1M0 start project.

This project was built for Rowley CrossWorks V4.7.1.

Supported hardware:
===================
The sample project for the K64FN1M0 is prepared to run on
a FRDM K64F eval board. Using different target hardware
may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library
  is used.

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.

Note:
=====
If you receive the following warning please ignore it:
"Target processor mismatch - The target processor defined in the project (MK64FN1M0xxx12)
is not the same as the processor attached to the target interface (MK62FN0)"
