ReadMe.txt for the SAMG53 start project.

This project was built for Rowley CrossWorks V4.7.1.

Supported hardware:
===================
The sample project for the Atmel SAMG53 CPU is prepared
to run on an Atmel ATSAMG53 Xplained Pro eval board.
Using different target hardware may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library
  is used.
  To use SEGGER SystemView with this configuration, configure
  SystemViewer for ATSAMG53N19 as target device and SWD at
  2000 kHz as target interface. In addition, the Rowley
  CrossStudio must not be connected to the target via J-Link.

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.
