ReadMe.txt for the SAM3X8H start project.

This project was built for Rowley CrossWorks V4.7.1.

Supported hardware:
===================
The sample project for Atmel SAM3X8H is prepared to run
on an Atmel ATSAM3X-EK eval board. Using different target
hardware may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library
  is used.

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.
