ReadMe.txt for BSP for the AT91SAM3U_EK start project.

This project was built for Rowley CrossWorks V4.7.1.

Supported hardware:
===================
The sample project for the Atmel SAM3U4E is prepared to
run on an Atmel ATSAM3U-EK eval board. Using different
target hardware may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library
  is used.

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.
