ReadMe.txt for the NXP LPC1788 start project.

This project was built for Keil MDK uVision V5.36.

Supported hardware:
===================
The sample project for the NXP LPC1788 is prepared to run on
an Embedded Artists LPC1788-32 Development Kit. Using different
target hardware may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library is
  used.
  To use SEGGER SystemView with this configuration, configure
  SystemView for LPC1788 as target device and SWD at
  2000 kHz as target interface.

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.