ReadMe.txt for the NXP LPC1768 start project.

This project was built for Keil MDK uVision V5.36.

Supported hardware:
===================
The sample project for the LPC1768 is prepared to run on
a KEIL MCB1700 eval board. Using different target hardware
may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library is
  used.
  To use SEGGER SystemView with this configuration, configure
  SystemView for LPC1768 as target device and SWD at 2000 kHz
  as target interface.

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.
