ReadMe.txt for the NXP (Freescale) K40X256 start project.

This project was built for Keil MDK uVision V5.36.

Supported hardware:
===================
The sample project for the K40X256 is prepared to run on
an NXP (Freescale) TWR_K40X256 eval board. Using different
target hardware may require modifications.

Configurations
==============
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library
  is used.
  To use SEGGER SystemView with this configuration, configure
  SystemView for MK40DX256xxx10 as target device and SWD at
  2000 kHz as target interface.

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.
