ReadMe.txt for the Renesas R7S72100 start project.

This project was built for Rowley CrossWorks for ARM V3.6.3
It has been tested with the following versions:
- V3.6.3

Supported hardware:
===================
The sample project for Renesas R7S72100 is prepared
to run on a Renesas RSKRZA1 eval board, but may be used on other 
target hardware as well.

Using different target hardware may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into
  internal SRAM using J-Link.
  An embOS debug and profiling library is used.

- Debug_SPI_Flash:
  This configuration is prepared for download into
  external SPI Flash using J-Link.
  An embOS debug and profiling library is used.

- Release:
  This configuration is prepared for download into
  internal SRAM using J-Link.
  An embOS release library is used.

 -Release_SPI_Flash:
  This configuration is prepared for download into
  external SPI Flash using J-Link.
  An embOS debug and profiling library is used.

Notes:
======
Boot modes selectable via SW6:
NOR flash  ON-ON-ON-ON-ON-ON
QSPI flash OFF-ON-OFF-ON-ON-ON