Readme.txt for BSP for the AT91SAM7X256 start project.

This project was built for Rowley CrossWorks for ARM V3.6.3
It has been tested with the following versions:
- V3.6.3

Supported hardware:
===================
The sample project for ATMEL AT91SAM7X256 is prepared
to run on an ATMEL AT91SAM7X256-EK eval board,
but may be used on other target hardware as well.

Using different target hardware may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into
  internal Flash using J-Link.
  An embOS debug and profiling library is used.

- Release:
  This configuration is prepared to build a "release"
  output which can be downloaded into Flash using J-Link.
  An embOS release library is used.

  


