Readme.txt for BSP for STR710 starter board

Supported hardware:
===================
The sample project for ST STR71x CPUs is prepared for
the ST STR710 Eval board, but may be used for
other target hardware as well


Targets:
========

- Simulator
  The simulator target is prepared to run under the
  uVision simulator and uses the Flash memory layout.
  
- STR712 Flash-ULINK:
  This configuration is prepared for debuging and 
  download into target FLASH using KEIL ULINK.
  The switches SW13, SW14 and SW15 have to be switched
  to locate the CPUs internal Flash at 0x00

- STR712 RAM-ULINK:
  This configuration is prepared for debuging and 
  download into target RAM using KEIL ULINK.
  The initilization File RAM.ini performs the download.
  The switches SW13, SW14 and SW15 have to be switched
  to locate the CPUs internal RAM at 0x00




