Readme.txt for BSP for KEIL MCB2100 starter board

Supported hardware:
===================
The sample project for an NXP LPC2129 CPU is prepared for
the KEIL MCB2100 Eval board, but may be used for
other target hardware as well


Targets:
========

- Simulator
  The simulator target is prepared to run under the
  uVision simulator and uses the Flash memory layout.
  
- MCB2100 Flash:
  This configuration is prepared for debuging and 
  download into target FLASH using KEIL ULINK.

- MCB2100 RAM:
  This configuration is prepared for debuging and 
  download into target RAM using KEIL ULINK.
  The initilization File RAM.ini performs the download
  and ensures that interrupt vectors are remapped to 0x00.




