ReadMe.txt for the Xilinx XCZU2EG_R5_0 start project.

This project was built for IAR Embedded Workbench for ARM V8.40.2.

Supported hardware:
===================
The sample project for the XCZU2EG_R5_0 is prepared to run on an
Enclustra Mercury XU5 SoC module on an Enclustra Mercury+ PE1 base board.
Using different target hardware may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into TCM using J-Link.
  An embOS debug and profiling library is used.

- Release:
  This configuration is prepared for download into TCM using J-Link.
  An embOS release library is used.

Notes:
======
To use embOSView via DCC on this project, configure embOSView for
a generic Cortex-R5 instead of the specific XCZU2EG_R5_0.