Readme.txt for the Toshiba TMPA910 start project.

This project was built for IAR Embedded Workbench for ARM V8.11.1.

Supported hardware:
===================
The sample project for the TMPA910 is prepared to run on
a Toshiba BMSKTOPASA910 board. Using different target
hardware may require modifications.

Configurations:
===============
- Debug_SDRAM:
  This configuration is prepared for download into target
  RAM using J-Link. An embOS debug and profiling library
  is used.

- Release_FLASH:
  Uses the IAR flash-loader to download the program
  into Flash. An embOS release library is used.

Notes:
======
Check Switch close to display for correct setting:
For Flash configuraton, set NAND to ON.
