Readme.txt for the TI TMS470 start project.

This project was built for IAR Embedded Workbench for ARM V8.11.1.

Supported hardware:
===================
The sample project for the TMS470 is prepared to run on
a TI TMDS FET470R1B1M KickStart board. Using different
target hardware may require modifications.

Configurations:
===============
- Debug_Flash:
  This configuration is prepared for download into target
  flash using J-Link. An embOS debug and profiling library
  is used.

- Release_FLASH:
  Uses the IAR flashloader to download the program
  into Flash. An embOS release library is used.

Notes:
======
Use the contained TMS470R1B1M_FLASH.mac only if needed to
unlock Flash.
