ReadMe.txt for the Xilinx XC7Z007S start project.

This project was built for IAR Embedded Workbench for ARM V8.11.1.

Supported hardware:
===================
The sample project for the XC7Z007S is prepared to run on
a SEGGER emPower Zynq board. Using different target hardware
may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into external
  Flash using J-Link. An embOS debug and profiling library
  is used.
  To use SEGGER SystemView with this configuration, configure
  SystemView for XC7Z007S as target device and JTAG at
  4000 kHz as target interface.

- Release:
  This configuration is prepared for download into external
  Flash using J-Link. An embOS release library is used.
