Readme.txt for the ST STR750 start project.

This project was built for IAR Embedded Workbench for ARM V8.11.1.

Supported hardware:
===================
The sample project for the STR750 is prepared to run on
a ST STR750-Eval board. Using different target hardware may
require modifications.

Configurations:
===============
- Debug_RAM:
  This configuration is prepared for download into target
  RAM using J-Link. An embOS debug and profiling library
  is used.

- Debug_Flash:
  This configuration is prepared for download into target
  flash using J-Link. An embOS debug and profiling library
  is used.

- Release_Flash:
  This configuration is prepared for download into target
  flash using J-Link.  An embOS release library is used.

Notes:
======
The jumper settings for the RAM and Flash configurations are:

        | RAM | Flash
    ----+-----+-------
    SW1 |  0  |   0
    ----+-----+-------
    SW2 |  1  |   0
