Readme.txt for the Atmel AT91SAM7S256 start project.

This project was built for emIDE V2.20.

Supported hardware:
===================
The sample project for the AT91SAM7S256 is prepared to run on
an Atmel AT91SAM7S256-EK eval board. Using different target
hardware may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library is
  used.

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.
