ReadMe.txt for the NXP iMX6Y2 start project.

This project was built for Segger Embedded Studio V6.34a.

Supported hardware:
===================
The sample project for the iMX6Y2 is prepared to run on
a NXP MCIMX6ULL EVK. Using different target hardware may
require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  SRAM using J-Link. An embOS debug and profiling library
  is used.

- Release:
  This configuration is prepared for download into internal
  SRAM using J-Link. An embOS release library is used.

Notes:
======
Since this project is a RAM application that is loaded into RAM
on debug start, please set the device into the reserved boot
mode in order to avoid any possible issues caused by the boot ROM.

SW602:
ON
|---|
|x|x|
|---|
| | |
|---|
 1 2