ReadMe.txt for the Microchip (Atmel) AT91SAM7S256 start project.

This project was built for Segger Embedded Studio V7.10a.

Supported hardware:
===================
The sample project for the AT91SAM7S256 is prepared to run on
a Microchip (Atmel) AT91SAM7S-EK eval board. Using different
target hardware may require modifications.

Configurations:
===============
- Debug:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS debug and profiling library
  is used.

- Release:
  This configuration is prepared for download into internal
  Flash using J-Link. An embOS release library is used.
