ST STM3210E-EVAL

We have board support packages (BSPs) and complete projects available for various ST Eval boards.

Different software packages are available for different boards; the packages include some or all of the following components:

embOS - real time OS / RTOS
emWin - graphic software / GUI
emFile - file system with support for NAND-, NOR- flashes, SD, CF cards, IDE and more
emUSB - USB device stack with support for bulk, MSD, CDC, HID and more

Some packages are executable demos, which can not be modified; some packages are trial versions, which come with the software in a library and the application in source code form, as well as a project for the IDE that has been used. Trial versions can usually be recompiled easily in less than a minute if the required compiler and IDE is installed. The application program can be modified, allowing intensive tests of the software. emWin trial versions usually also contain a simulation environment which allows test and recompilation on a PC.

STM3210E-EVAL

ST MB672 Eval board

Controller:

STM32F103ZET6

CPU:

ARM Cortex-M3

Board main Features:

Three 5V power supply options: Power jack, USB connector or daughter board.
128 Mbit serial Flash, 512Kx16 SRAM, 1Gbit NAND Flash and 128 Mbit NOR Flash.
Boot from User Flash, System memory or SRAM.
I2S Audio DAC, stereo audio jack.
128 MByte MicroSD card.
Both type A&B Smart card support.
I2C/SMBus compatible serial interface temperature sensor.
2 channels of RS232 communication with RTS/CTS handshake support on one channel.
IrDA transceiver.
USB2.0 full speed connection.
CAN2.0A/B compliant connection.
Inductor Motor Control connector.
JTAG and Trace Debug support.
240x320 TFT color LCD
Joystick with 4-direction control and selector.
Reset, Wakeup, Tamper and User button.
4 LEDs.
RTC with backup battery.
Extension connector for daughter board or wrapping board.

Processor main features:

Implements the ARM architecture v7-M
Thumb-2 instruction set (Enhanced levels of performance, energy efficiency, code density, mixed mode capability, ARM levels of performance with Thumb level code density)
Memory Protection Unit (MPU)
Embedded Trace Macrocell(ETM)
Data Watchpoint and Trace unit (DWT)
Flash Patch and Breakpoint unit (FPB)
Debug Port (SW-DP or SWJ-DP)
Single cycle multiply and hardware divide instructions
Preconfigured memory map
Up to 4 gigabytes of addressable memory space
Predefined addresses for code, memory, external devices, peripherals
Dedicated space for vendor specific addressability
Atomic bit manipulation with bit banding (Direct access to single bits of data)
Unaligned data storage and access
Integrated sleep modes (Sleep Now, Sleep on Exit)

Available software:
Segger Eval Software (embOS, emWin) IARV4
Segger Eval Software (embOS, emWin) IARV5
Segger Eval Software (embOS, emWin) Keil MDK