ST MB525 Eval board

We have board support packages (BSPs) and complete projects available for various ST Eval boards.

Different software packages are available for different boards; the packages include some or all of the following components:

embOS - real time OS / RTOS
emWin - graphic software / GUI
emUSB - USB device stack with support for bulk, MSD, CDC, HID and more

Some packages are executable demos, which can not be modified; some packages are trial versions, which come with the software in a library and the application in source code form, as well as a project for the IDE that has been used. Trial versions can usually be recompiled easily in less than a minute if the required compiler and IDE is installed. The application program can be modified, allowing intensive tests of the software. emWin trial versions usually also contain a simulation environment which allows test and recompilation on a PC.

ST MB525 Rev. B

ST MB525 Rev. B Eval board

Controller:

STM32F103VBT6

CPU:

ARM Cortex-M3

Board main Features:

Three 5V power supply options: Power jack, USB connector or daughter board
Boot from User Flash, Test Flash or SRAM
Audio play and record
64MByte MicroSD card
Both type A&B Smart card support
8Mbyte serial Flash
I2C/SMBus compatible serial interface temperature sensor
2 channels of RS232 communication with RTS/CTS handshake support on one channel
IrDA transceiver
USB2.0 full speed connection
CAN2.0A/B compliant connection
Inductor Motor Control connector
JTAG, SWD and Trace Debug support
122x32 dot-Matrix LCD and 240x320 TFT color LCD
Joystick with 4-direction control and selector
Reset, Wakeup, Tamper and User button
4 LEDs
RTC with backup battery
Extension connector for daughter board or wrapping board

Processor main features:

Implements the ARM architecture v7-M
Thumb-2 instruction set (Enhanced levels of performance, energy efficiency, code density, mixed mode capability, ARM levels of performance with Thumb level code density)
Memory Protection Unit (MPU)
Embedded Trace Macrocell(ETM)
Data Watchpoint and Trace unit (DWT)
Flash Patch and Breakpoint unit (FPB)
Debug Port (SW-DP or SWJ-DP)
Single cycle multiply and hardware divide instructions
Preconfigured memory map
Up to 4 gigabytes of addressable memory space
Predefined addresses for code, memory, external devices, peripherals
Dedicated space for vendor specific addressability
Atomic bit manipulation with bit banding (Direct access to single bits of data)
Unaligned data storage and access
Integrated sleep modes (Sleep Now, Sleep on Exit)

Available software:
Segger Eval Software (emWin, embOS, emUSB) for IAR EWARM V5.11 and EWARM V5.20
emWin trial version for IAR EWARM V4
ST Demo with emWin trial version for IAR EWARM V4
embOS trial version for IAR EWARM V4

Available documentation:
Getting started with Segger Eval Software and IAR