Segger Logo Embedded Software Solutions
Software productsHardware productsDownloadsPricesCustomersOur PartnersSitemapForumAbout us
LogicPD LH79520 Eval board
| Analog Devices |Atmel |Freescale |LuminaryMicro |Microchip |NEC |NXP |Oki |Renesas |Sharp |ST Microelectronics |Texas Instruments |Toshiba |

We have board support packages (BSPs) and complete projects available for various Sharp Eval boards.

Different software packages are available for different boards; the packages include some or all of the following components:

  • embOS - real time OS / RTOS
  • emWin - graphic software / GUI
  • emFile - file system with support for NAND-, NOR- flashes, SD, CF cards, IDE and more
  • emUSB - USB device stack with support for bulk, MSD, CDC, HID and more

Some packages are executable demos, which can not be modified; some packages are trial versions, which come with the software in a library and the application in source code form, as well as a project for the IDE that has been used. Trial versions can usually be recompiled easily in less than a minute if the required compiler and IDE is installed. The application program can be modified, allowing intensive tests of the software. emWin trial versions usually also contain a simulation environment which allows test and recompilation on a PC.

LH79520

LogicPD LH79520 Eval board

 

Controller:
  • LH79520-NOM-000 (Sharp)
CPU:
  • ARM720T

Board main Features:
  • Programmable color LCD controller
  • Integrated 4-wire touch screen controller
  • 10/1100 Base-TT Ethernet controller for application/debug (SMSC LAN 91C111)
  • Compact Flash Type I card (memory-mapped only)
  • Smart Card, MMC/SD, dual PCMCIA
  • One USB 2.0 full-speed host interfaces
  • One USB 2.0 full-speed device interface
  • One RJ45 Ethernet jack connector with magnetics
  • 115.2 KBytes/s RS-232 debug serial port
  • Standard 100 mil pitch header
  • Access to all Card Engine signals
  • RoHS Compliant

Processor main features:
  • Built around a ARM7TDMI core
  • 32/16-bit RISC architecture (ARMv4T)
  • 32-bit ARM instruction set for maximum performance and flexibility
  • 16-bit Thumb instruction set for increased code density
  • Unified 32-bit AHB bus interface carries both instructions and data
  • Power-efficient three-stage pipeline
  • 32-bit ALU
  • 8 KByte unified cache
  • Memory Management Unit (MMU)
  • Very small die size and low power consumption
  • Fully static operation
  • Coprocessor interface
  • Extensive debug facilities: (EmbeddedICE-RT real-time debug unit, JTAG interface unit, Interface for direct connection to ETM)

Available software:
embOS trial version IAR