|
We have board support packages (BSPs) and complete projects
available for various Sharp Eval boards.
Different software packages are available for different
boards; the packages include some or all of the following components:
- embOS - real time OS / RTOS
- emWin - graphic software / GUI
- emFile - file system with support for NAND-, NOR- flashes, SD, CF cards, IDE and more
- emUSB - USB device stack with support for bulk, MSD, CDC, HID and more
Some packages are executable demos, which can not be modified; some packages
are trial versions, which come with the software in a library and the
application in source code form, as well as a project for the IDE that
has been used. Trial versions can usually be recompiled easily in less
than a minute if the required compiler and IDE is installed. The application
program can be modified, allowing intensive tests of the software. emWin
trial versions usually also contain a simulation environment which allows
test and recompilation on a PC.
Below is a list of supported Eval boards. The software
can easily be ported to other hardware platforms. If you are looking for
software for an Eval board not in this list, please get in touch with
us.
Supported Eval boards
LogicPD LH7A400-10 Eval board
|
Controller:
CPU:
Board main Features:
- Programmable color LCD controller
- Integrated 4-wire touch screen controller
- 10/1100 Base-TT Ethernet controller for application/debug (SMSC LAN 91C111)
- Compact Flash Type I card (memory-mapped only)
- Smart Card, MMC/SD, dual PCMCIA
- One USB 2.0 full-speed host interfaces
- One USB 2.0 full-speed device interface
- Stereo input and output jacks
- One RJ45 Ethernet jack connector with magnetics
- 115.2 KBytes/s RS-232 debug serial port
- Standard 100 mil pitch header
- Access to all Card Engine signals
- RoHS Compliant
More |
LogicPD LH7A404-N0E Eval board
|
Controller:
CPU:
Board main Features:
- Programmable color LCD controller
- Integrated 4-wire touch screen controller
- 10/1100 Base-TT Ethernet controller for application/debug (SMSC LAN 91C111)
- Compact Flash Type I card (memory-mapped only)
- Smart Card, MMC/SD, dual PCMCIA
- One USB 2.0 full-speed host interfaces
- One USB 2.0 full-speed device interface
- Stereo input and output jacks
- One RJ45 Ethernet jack connector with magnetics
- 115.2 KBytes/s RS-232 debug serial port
- Standard 100 mil pitch header
- Access to all Card Engine signals
- RoHS Compliant
More |
LogicPD LH79520 Eval board
|
Controller:
CPU:
Board main Features:
- Programmable color LCD controller
- Integrated 4-wire touch screen controller
- 10/1100 Base-TT Ethernet controller for application/debug (SMSC LAN 91C111)
- Compact Flash Type I card (memory-mapped only)
- Smart Card, MMC/SD, dual PCMCIA
- One USB 2.0 full-speed host interfaces
- One USB 2.0 full-speed device interface
- One RJ45 Ethernet jack connector with magnetics
- 115.2 KBytes/s RS-232 debug serial port
- Standard 100 mil pitch header
- Access to all Card Engine signals
- RoHS Compliant
More |
LogicPD LH79524 Eval board
|
Controller:
CPU:
Board main Features:
- Programmable color LCD controller
- Integrated 4-wire touch screen controller
- 10/1100 Base-TT Ethernet controller for application/debug (SMSC LAN 91C111)
- Compact Flash Type I card (memory-mapped only)
- Smart Card, MMC/SD, dual PCMCIA
- One USB 2.0 full-speed host interfaces
- One USB 2.0 full-speed device interface
- Stereo input and output jacks
- One RJ45 Ethernet jack connector with magnetics
- 115.2 KBytes/s RS-232 debug serial port
- Standard 100 mil pitch header
- Access to all Card Engine signals
- RoHS Compliant
More |
Sharp LH79531 Eval board
|
Controller:
CPU:
Board main Features:
- LCD Panel Connector, Touch Panel Connector
- USB Port, RS-232C Port x 2, IrDA Port x 1
- 1 Mbytes SRAM(512kbytes x 16bits, 15ns)
- 4 Mbytes Flash(2Mbytes x 16bits, 90ns) x 2
More |

Copyright SEGGER Microcontroller GmbH & Co.KG. All
rights reserved.
For more information, please visit our web site
www.segger.com or contact us at info@segger.com
Last update:
August 15, 2008
|