|
We have board support packages (BSPs) and complete projects
available for various Renesas Eval boards.
Different software packages are available for different
boards; the packages include some or all of the following components:
- embOS - real time OS / RTOS
- emWin - graphic software / GUI
- emFile - file system with support for NAND-, NOR- flashes, SD, CF cards, IDE and more
- emUSB - USB device stack with support for bulk, MSD, CDC, HID and more
Some packages are executable demos, which can not be modified; some packages
are trial versions, which come with the software in a library and the
application in source code form, as well as a project for the IDE that
has been used. Trial versions can usually be recompiled easily in less
than a minute if the required compiler and IDE is installed. The application
program can be modified, allowing intensive tests of the software. emWin
trial versions usually also contain a simulation environment which allows
test and recompilation on a PC.
Below is a list of supported Eval boards. The software
can easily be ported to other hardware platforms. If you are looking for
software for an Eval board not in this list, please get in touch with
us.
Supported Eval boards
Renesas EDK2378 Eval board
| 
|
Controller:
CPU:
Board main features:
- Three switches (Reset, Boot, NMI)
- Four red LEDs
- Low cost second-generation (2G) evaluation board
- High-performance Embedded Workshop v3 debugger support
- On-board SRAM (dependent on device)
- All I/O signals tracked to header pins for user access
- On-board FLASH programming using Flash Development Toolkit
- Standard serial port host interface
- PSU available seperately
More |
Renesas RSKH8S2378 Eval board
| 
|
Controller:
CPU:
Board main features:
- Three switches (Reset, Boot, NMI)
- Four red LEDs
- Low cost second-generation (2G) evaluation board
- High-performance Embedded Workshop v3 debugger support
- On-board SRAM (dependent on device)
- All I/O signals tracked to header pins for user access
- On-board FLASH programming using Flash Development Toolkit
- Standard serial port host interface
- PSU available seperately
More |
Renesas RSKH8SX1668R Eval board
| 
|
Controller:
CPU:
Board main features:
- MiniUSB device connector
- Internal NOR Flash
- Three push buttons
- One reset button
More |
MSC VisuRDKH8SX1668R Eval board
| 
|
Controller:
CPU:
Board main features:
- Ampire QVGA TFT LCD
- Ethernet Controller SMSC9118
- SD card slot
- MiniUSB device connector
- Internal NOR Flash
- One reset button
More |
Renesas RSKH8S2472 Eval board
|
Controller:
CPU:
Board main features:
- Three switches (Reset, Boot, NMI)
- Four user LEDs
- Low cost second-generation (2G) evaluation board
- High-performance Embedded Workshop v3 debugger support
- All I/O signals tracked to header pins for user access
- Standard serial port host interface
More
|
Renesas RSK+SH7203 Eval board
| 
|
Controller:
CPU:
Board main features:
- One reset switch
- Three user-defined switches
- USB Host and USB Device connector
- 100 MBits/s Ethernet controller
- Serial Sound Interface
- 4 MB external Flash ROM
- 16 MB external SDRAM
- QVGA LCD Display
More |
Renesas RSK2+SH670 Eval board
| 
|
Controller:
CPU:
Board main features:
- One reset switch
- Three user-defined switches
- USB Host and USB Device connector
- 100 MBits/s Ethernet controller
- Serial Sound Interface
- 4 MB external Flash ROM
- 16 MB external SDRAM
- QVGA LCD Display
More |
Renesas RSK2R32C111 Eval board + Segger Visualization Add on
| 
|
Controller:
CPU:
Board main features:
- LCD module
- Two application board interfaces
- Serial port
- Three user-defined switches
- One reset switch
- Analog adjust
- Four user LEDs
- E8A connector
- E30A connector (not fitted)
Add on features:
- 3.5" 1/4 VGA 320x240 TFT LCD Module with TouchScreen and backlight
- No display controller required; the display is driven by up to 3 UARTs
- The display can be used in black/white mode, 2 or 3 bpp monochrome or 8 color mode
- Display mode selectable via software
- Joystick on board
More |
MSC VisuRDK-H8S-NL3224 MSC Eval board
|
Controller:
CPU:
Board main features:
- Three switches (Reset, Boot, NMI)
- Four red LEDs
- Low cost second-generation (2G) evaluation board
- High-performance Embedded Workshop v3 debugger support
- On-board SRAM (dependent on device)
- All I/O signals tracked to header pins for user access
- On-board FLASH programming using Flash Development Toolkit
- Standard serial port host interface
- PSU available seperately
More
|
Copyright SEGGER Microcontroller GmbH & Co.KG. All
rights reserved.
For more information, please visit our web site
www.segger.com or contact us at info@segger.com
Last update:
June 18, 2009
|
Software
for Renesas Eval boards
