SEGGER Production Tools

For production environments, we provide flash programming solutions for a variety of CPUs.

Stand-alone programmer "Flasher"

The Flasher family eases the implementation into a production site by allowing the flash programming to be triggered manually or remotely.

Software solutions for flash programming via J-Link

In addition to our hardware products, we offer software solutions that allow J-Link to be used as production tool. The available software packages are

• J-Flash: Stand-alone programming software for a variety of microcontrollers and external flashes
• DFPU: Dedicated flash programming utilities for eval boards or custom hardware. NOR, NAND and SPI flashes can be supported, source code of utilities available.
• SDK: Software development kit. Allows writing your own program and gives you full control over J-Link and your target CPU.

	Flasher ARM Flasher ARM is a programming tool for microcontrollers with on-chip or external Flash memory and ARM core. Flasher ARM is designed for programming flash targets with the J-Flash software or stand-alone. Main features Stand-alone JTAG/SWD programmer (Once set up, Flasher can be controlled without the use of PC program) Support for ARM 7/9 and Cortex-M3 Ethernet interface No power supply required, powered through USB   [More...]
	Flasher RX Flasher RX is a programming tool for Renesas RX600 series microcontrollers with on-chip or external flash memory and Renesas RX core. Main features Support for Renesas RX600 series CPUs (RX610, RX621, RX62N, RX62T) No power supply required, powered through USB Can be used as J-Link (JTAG emulator) with a download speed (into RAM) of up to 720 Kbytes/second Programming speed between 30-300 Kbytes/second depending on target hardware   [More...]
	Flasher PPC Flasher PPC is a programming tool for PowerPC based microcontrollers with on-chip or external flash memory.. Main features Support for ST SPC560 devices No power supply required, powered through USB Host interfaces: Ethernet, USB , RS232 Data files can be updated via Ethernet/USB using J-Flash, via RS232 or via the mass storage functionality of Flasher PPC Programming speed up to 111 Kbytes/second depending on target hardware   [More...]
	Flasher 5 Flasher 5 is a programming tool for ST9 and Renesas M16C/20, M16C/62, M16C/80, M32C, R8C, R32C, M38 and M79 series of flash microcontrollers in serial mode (1.5 MByte FLASH to store target program, remote control functions for automated testers). Main features Serial (in target) programming supported PC program allows batch mode processing for usage in automated test systems. Once set up, Flasher can be controlled without the use of PC program   [More...]
	Flasher ST7 Flasher ST7 is a programming tool for ST7 series of flash microcontrollers. Main features Small, compact housing Easy to use windows program 512 KByte internal Flash memory to store target program   [More...]
	Flasher STM8 Flasher STM8 is a programming tool for STM8 series of flash microcontrollers. Main features All STM8 devices can be programmed Integrated optical isolation between host and target system Full duplex 100Mbit Ethernet interface 128 MB internal flash memory to store target program   [More...]